Beam Steering Phased Array Antenna With Fully Printed Phase Shifters Based on Low-Temperature Sintered BST-Composite Thick Films

摘要

This letter presents a novel approach to fully-printed phase shifters for electronically steering the beam of a phased array antenna at S-Band. The phased array consists of four microstrip patch antenna elements and phase shifters, as well as a four-to-one feeding network. As key components in the circuit, the phase shifters are provided with a microstrip loaded-line topology, equipping fully-printed metal-insulator-metal (MIM) varactors with low-temperature sintered BST composite thick films between the top and bottom silver electrodes. Furthermore, a simple biasing concept is implemented for controlling the phase shifter. The fully-printed, low-cost phase shifters achieved a phase shift of 274 and a FoM of 37.3/dB at 3 GHz. The length of the phase shifters was , where their phase shift versus length resulted in a 14.4/mm measurement, outperforming all previously reported phase shifters based on fully-printed low-temperature sintered BST thick film. The beam-scanning range of the four-antenna element array was .