Measurement and Modeling of Hydrogen Environment–Assisted Cracking of Ultra-High-Strength Steel

摘要

Modern precipitation-hardened ultra-high-strength AERMET 100 steel (Fe-Co-Ni-Cr-Mo-C) is susceptible to severe transgranular hydrogen environment–assisted cracking (HEAC) in neutral 3.5 pct NaCl solution. The threshold stress intensity for HEAC, K TH , is reduced to as low as 10 pct of K IC , and the stage II subcritical crack growth rate, da/dt II, is up to 0.5 μm/s. Low K TH and high da/dt II are produced at potentials substantially cathodic, as well as mildly anodic, to free corrosion. However, a range exists at slightly cathodic potentials (–0.625 to –0.700 VSCE), where the crack growth rate is greatly reduced, consistent with reduced crack-tip acidification and low cathodic overpotential for limited H uptake. Short crack size (250 to 1000 μm) does not promote unexpectedly severe HEAC. High-purity AERMET 100 is susceptible to HEAC because martensite boundary trapping and high crack-tip stresses strongly enhance H segregation to sites that form a transgranular crack path. The stage II da/dt is H diffusion rate limited for all potentials examined. A semiquantitative model predicts the applied potential dependence of da/dt II using reasonable input parameters, particularly crack-tip H uptake reverse calculated from measured K TH and a realistic critical distance. Modeling challenges remain.