首页> 美国卫生研究院文献>Materials >Hydrogen-Assisted Crack Growth in the Heat-Affected Zone of X80 Steels during in Situ Hydrogen Charging
【2h】

Hydrogen-Assisted Crack Growth in the Heat-Affected Zone of X80 Steels during in Situ Hydrogen Charging

机译:X80钢原位加氢过程中热影响区氢助裂纹的扩展

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

Herein, the hydrogen embrittlement of a heat-affected zone (HAZ) was examined using slow strain rate tension in situ hydrogen charging. The influence of hydrogen on the crack path of the HAZ sample surfaces was determined using electron back scatter diffraction analysis. The hydrogen embrittlement susceptibility of the base metal and the HAZ samples increased with increasing current density. The HAZ samples have lower resistance to hydrogen embrittlement than the base metal samples in the same current density. Brittle circumferential cracks located at the HAZ sample surfaces were perpendicular to the loading direction, and the crack propagation path indicated that five or more cracks may join together to form a longer crack. The fracture morphologies were found to be a mixture of intergranular and transgranular fractures. Hydrogen blisters were observed on the HAZ sample surfaces after conducting tensile tests at a current density of 40 mA/cm2, leading to a fracture in the elastic deformation stage.
机译:在此,使用慢应变速率张力原位氢装填检查热影响区(HAZ)的氢脆。使用电子反向散射衍射分析确定氢对HAZ样品表面裂纹路径的影响。贱金属和HAZ样品的氢脆敏感性随电流密度的增加而增加。在相同的电流密度下,热影响区样品的抗氢脆性比贱金属样品低。位于热影响区样品表面的脆性圆周裂纹垂直于加载方向,并且裂纹扩展路径表明五个或更多裂纹可能会结合在一起形成更长的裂纹。发现断裂形态是晶间和经晶间断裂的混合物。在以40 mA / cm 2 的电流密度进行拉伸试验后,在HAZ样品表面观察到氢气起泡,导致弹性变形阶段断裂。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号