首页> 外文期刊>Metallurgical and Materials Transactions B >Kinetics and Mechanism of the Simultaneous Carbothermic Reduction of FeO and MnO from High-Carbon Ferromanganese Slag
【24h】

Kinetics and Mechanism of the Simultaneous Carbothermic Reduction of FeO and MnO from High-Carbon Ferromanganese Slag

机译:高碳锰铁渣同时热还原FeO和MnO的动力学及机理

获取原文
获取原文并翻译 | 示例
       

摘要

The carbothermic reduction of 38.7 pct MnO-12.1 pct CaO-5.4 pct MgO-9.3 pct Al2O3-24.1 pct SiO2-10.4 pct FeO slag in Ar at 1600 °C was studied using the sessile drop wettability technique. Pure graphite, coke, and charcoal were used as the carbon material substrates. The reduction rates were evaluated by sampling at different reduction times and by analyzing the chemical compositions of the reduced slag and the produced metal. The carbothermic FeO reduction from slag is initially fast followed by a much slower reduction rate. However, the rate of the MnO reduction is slow in the fast FeO reduction stage, and it starts to increase significantly during the slow FeO reduction stage. The kinetics of FeO and MnO reduction are affected by the type of carbonaceous materials. Moreover, the rate of the carbon dissolution/transfer into the produced metal phase and the amount of the transferred manganese to the metal phase depend on the type of carbon. Based on the experimental observations and the thermodynamic calculations, a mechanism for MnO reduction was proposed. According to this mechanism, MnO is mainly reduced through a metallothermic reduction by Fe and the rate of MnO reduction is controlled by the rate of the consumption of FeO from the slag, which takes place simultaneously. In contrast, the rate of FeO reduction in the fast initial reduction stage is controlled by the rate of the carbon dissolution/transfer into the metal phase. However, at the second slow FeO reduction stage, it is reduced mainly by the solid carbon.
机译:研究了在1600°C下Ar中38.7 pct MnO-12.1 pct CaO-5.4 pct MgO-9.3 pc Al2 O3 -24.1 pct SiO2 -10.4 pct FeO炉渣的碳热还原无滴润湿性技术。纯石墨,焦炭和木炭用作碳材料基材。通过在不同还原时间取样并分析还原炉渣和所产生金属的化学组成来评估还原率。最初从炉渣中还原碳热FeO的速度很快,其后的还原速度要慢得多。但是,MnO的还原速度在快速的FeO还原阶段很慢,并且在缓慢的FeO还原阶段开始显着增加。 FeO和MnO还原的动力学受碳质材料类型的影响。此外,碳溶解/转移到产生的金属相中的速率和转移到金属相中的锰的量取决于碳的类型。基于实验观察和热力学计算,提出了MnO还原的机理。根据该机理,主要通过Fe的金属热还原来还原MnO,并且MnO的还原速率由同时发生的炉渣中FeO的消耗速率控制。相反,快速初始还原阶段中FeO的还原速率由碳溶解/转移到金属相的速率控制。然而,在第二缓慢的FeO还原阶段,其主要被固体碳还原。

著录项

  • 来源
    《Metallurgical and Materials Transactions B》 |2009年第6期|929-939|共11页
  • 作者单位

    Department of Materials Science and Engineering Norwegian University of Science and Technology Trondheim Norway;

    Department of Materials Science and Engineering Norwegian University of Science and Technology Trondheim Norway;

    Department of Materials Science and Engineering Norwegian University of Science and Technology Trondheim Norway;

    Department of Materials Science and Engineering Norwegian University of Science and Technology Trondheim Norway;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

  • 入库时间 2022-08-18 02:27:10

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号