Comparison of High-Temperature Properties and Thermal Shock Resistance of Austempered Ductile Irons (ADI) with Those of Pearlitic Ductile Cast Irons

摘要

High-temperature strength and thermal shock resistance of austempered ductile iron (ADI) in high temperatures because of instability of ausferrite phase has been less interest. The aim of this study is to investigate the tensile properties of ADI and pearlitic ductile cast iron by using the short-time tensile test in high temperatures. Tensile test was conducted in temperatures of 298 K, 673 K, 873 K, and 1073 K (25 °C, 400 °C, 600 °C, and 800 °C). Thermal shock test also was conducted by using the molten lead bath at 1273 K (1000 °C). In this experiment, samples of pearlitic ductile cast iron and ADI were divided in two groups; that after immersing in the molten lead bath for 25 seconds, one group was cooled in the air and other one was quenched in the water. Results showed that strength and thermal shock resistance of ADI samples are higher than those of the pearlitic ductile cast iron.