首页> 外文期刊>Mechanical systems and signal processing >Development of multiple linear regression-based models for fatigue life evaluation of automotive coil springs
【24h】

Development of multiple linear regression-based models for fatigue life evaluation of automotive coil springs

机译:基于多个线性回归模型的汽车螺旋弹簧疲劳寿命评估

获取原文
获取原文并翻译 | 示例
           

摘要

This paper discusses the establishment of multiple linear regression (MLR)-based spring durability models for predicting the fatigue life of automotive coil springs based on the vertical vibrations of the vehicle and natural frequencies of the vehicle suspension system. These models were developed in order to simplify the design and development process of vehicle suspension systems, which is both time-intensive and cost-intensive. The simulated force-time histories were processed to obtain the fatigue life of the automotive coil spring based on the strain-life models whereas the acceleration-time histories were weighted according to the ISO-2631-1:1997 standard to determine the vertical vibrations of the vehicle. MLR was used to establish the spring durability models and the goodness of fit, linearity, normality, and homoscedasticity of the models were assessed. The highest coefficient of determination at 0.8820 was obtained for the Morrow MLR-based spring durability model, with the mean square error of 0.5855. The models were validated by comparing the fatigue life values predicted by the models with those predicted from strain measurements. The results show a good agreement between the predicted and experimental values, indicating the suitability of these models in predicting the fatigue life of automotive coil springs. (C) 2018 Elsevier Ltd. All rights reserved.
机译:本文讨论了基于多重线性回归(MLR)的弹簧耐久性模型的建立,该模型基于车辆的垂直振动和车辆悬架系统的固有频率来预测汽车螺旋弹簧的疲劳寿命。开发这些模型是为了简化既费时又费钱的车辆悬架系统的设计和开发过程。根据应变寿命模型处理模拟的力-时间历史,以获得汽车螺旋弹簧的疲劳寿命,而加速度-时间历史则根据ISO-2631-1:1997标准进行加权,以确定弹簧的垂直振动。机动车。使用MLR建立弹簧耐久性模型,并评估模型的拟合度,线性,正态性和均方差性。对于基于Morrow MLR的弹簧耐久性模型,确定系数最高,为0.8820,均方差为0.5855。通过将模型预测的疲劳寿命值与应变测量预测的疲劳寿命值进行比较,对模型进行了验证。结果表明预测值与实验值之间具有良好的一致性,表明这些模型在预测汽车螺旋弹簧的疲劳寿命方面的适用性。 (C)2018 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号