Effect of lubricant on the reliability of dental implant abutment screw joint: An in vitro laboratory and three-dimension finite element analysis

摘要

Biomechanical factors play a key role in the success of dental implants. Fracture and loosening of abutment screws are major issues. This study investigated the effect of lubricants on the stability of dental implant- abutment connection. As lubricants, graphite and vaseline were coated on the abutment screw surface, respec¬ tively, and a blank without lubricant served as the control. The total friction coefficient (μ_(tot)), clamping force, fa¬ tigue behavior and detorque of the joint combined with dynamic cyclic loading were measured under different lubricating conditions. Further, a three-dimensional finite element analysis was used to investigate stress distri¬ bution, in conjunction with experimental images. The results showed that the lubricant reduced μ_(tot), which in turn led to an increase in clamping force. Decrease in loading increased the fatigue life of the screw. However, use of lubricant at high load reduced the fatigue life. Ductile fracture at the first thread of the screw was the chief failure mode, which was due to maximum von Mises stress. Higher stress levels occurred in the lubricant groups. Lubricated screws resulted in lower detorque which made the joint easier to loosen. In conclusion, the lubricant cannot effectively improve the reliability of dental implant-abutment connection. Keeping the inter¬ faces of implant-screw uncontaminated and strengthening the surface of the screw may be recommend for clin¬ ical operation and future design.