...
首页> 外文期刊>Materials Science and Engineering >Investigation of the dielectric and thermal conductive properties of core-shell structured HGM@hBN/PTFE composites
【24h】

Investigation of the dielectric and thermal conductive properties of core-shell structured HGM@hBN/PTFE composites

机译:核壳结构HGM @ hBN / PTFE复合材料的介电和导热性能研究

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Porous polymer materials have been widely used for the preparation of low dielectric constant materials, but they also suffer from high moisture absorption and decreased thermal conductivity. In this study, core-shell structured hexagonal boron nitride coated hollow glass microsphere (HGM@hBN) particles were prepared using an electrostatic-assembly process and incorporated into poly(tetrafluoroethylene) (PTFE). The composites exhibited decreased dielectric constants due to the implantation of air, which is mainly encapsulated in HGM. The hBN layer on the surface of HGM effectively enhanced composite thermal conductivity due to its special coreshell form. The 30 vol% HGM@hBN/PTFE composites had a low dielectric constant of 1.68, low moisture absorption of 0.11%, and thermal conductivity (0.276 W/mK) was improved by 43% compared with that of 30 vol % HGM/PTFE composites. This study provides a facile and cost-effective strategy for fabricating polymer composites with low dielectric constant, low moisture absorption and no deteriorated thermal conductivity simultaneously.
机译:多孔聚合物材料已被广泛用于制备低介电常数的材料,但是它们也具有高吸湿性和导热性降低的缺点。在这项研究中,核壳结构的六方氮化硼涂层空心玻璃微球(HGM @ hBN)粒子是使用静电组装工艺制备的,并掺入聚四氟乙烯(PTFE)中。由于空气的注入,复合材料表现出降低的介电常数,空气主要被封装在HGM中。 HGM表面上的hBN层由于其特殊的核壳形式而有效地增强了复合材料的导热性。 30%(体积)的HGM @ hBN / PTFE复合材料与30%(体积)的HGM / PTFE复合材料相比,介电常数低,为1.68,吸湿率低,为0.11%,导热系数(0.276 W / mK)提高了43%。 。这项研究为制造具有低介电常数,低吸湿率且同时不降低导热性的聚合物复合材料提供了一种简便且经济高效的策略。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号