Effect of initial microstructure on mechanical properties in warm caliber rolling of high carbon steel

摘要

In this study, the effect of initial microstructure on change of mechanical properties was investigated by warm caliber rolling (WCR) of high carbon steel. Experiments were carried out with two different kinds of initial microstructures of pearlite and tempered martensite at the temperature of 500 ℃. For comparison, the microstructure of austenite phase obtained from the conventional hot rolling at the temperature of 900 ℃ up to about 83% of the accumulative reduction in area was assumed to be a reference case. It was found that the WCR provided better mechanical properties in terms of strength and toughness compared to the conventional hot rolling based on experimental results of micro-hardness, tension, and Charpy impact tests. The improvement of strength and toughness was attributed to smaller ferrite grain and dispersed cementite particles with smaller interspacing aligned to the rolling direction after the WCR owing to field emission scanning electron microscopy. The investigated WCR might be useful in obtaining the high strength material with better toughness without adding new alloying elements for industrial applications according to the present investigation.