Cold cracking in DC-cast high strength aluminum alloy ingots: An intrinsic problem intensified by casting process parameters

摘要

For almost half a century the catastrophic failure of direct chill (DC) cast high strength aluminum alloys has been challenging the production of sound ingots. To overcome this problem, a criterion is required that can assist the researchers in predicting the critical conditions which facilitate the catastrophic failure of the ingots. This could be achieved at first glance by application of computer simulations to assess the level and distribution of residual thermal stresses. However, the simulation results are only able to show the critical locations and conditions where and when high stresses may appear in the ingots. The prediction of critical void/crack size requires simultaneous application of fracture mechanics. In this paper, we present the thermo-mechanical simulation results that indicate the critical crack size distribution in several DC-cast billets cast at various casting conditions. The simulation results were validated upon experimental DC-casting trials and revealed that the existence of voids/cracks with a considerable size is required for cold cracking to occur.