首页> 外文期刊>Materials Letters >Dielectric properties of Sb_2O_3-doped Ba_(0.672)Sr_(0.32)Y_(0.008)TiO_3
【24h】

Dielectric properties of Sb_2O_3-doped Ba_(0.672)Sr_(0.32)Y_(0.008)TiO_3

机译:Sb_2O_3掺杂Ba_(0.672)Sr_(0.32)Y_(0.008)TiO_3的介电性能

获取原文
获取原文并翻译 | 示例
       

摘要

Sb_2O_3-doped Ba_(0.672)Sr_(0.32)Y_(0.008)TiO_3 (BSYT) dielectric ceramics were prepared by conventional solid state method, and their dielectric properties were investigated with variation of Sb_2O_3 doping content and sintering temperature. The X-ray diffraction patterns indicated that all the BSYT specimens possessed the perovskite polycrystalline structure. The experimental results reveal that the introduction of Sb_2O_3 into Ba_(0.672)Sr_(0.32)Y_(0.008)TiO_3 can control the grain growth, reduce the relative dielectric constant and dielectric loss, shift the Curie temperature to lower temperature and significantly improve the thermal stability of the BSYT ceramics. The samples doped with 1.6 wt.% Sb_2O_3 sintered at 1320℃ for 2 h exhibited attractive properties, including high relative dielectric constant (> 1500), low dielectric loss (< 40 x 10~(-4)), low temperature coefficient of capacitor(< ±35%) over a wide temperature range from -25℃ to +85℃.
机译:采用常规固态法制备了掺Sb_2O_3的Ba_(0.672)Sr_(0.32)Y_(0.008)TiO_3(BSYT)介电陶瓷,并研究了Sb_2O_3掺杂量和烧结温度的变化对介电性能的影响。 X射线衍射图谱表明,所有BSYT样品均具有钙钛矿多晶结构。实验结果表明,将Sb_2O_3引入Ba_(0.672)Sr_(0.32)Y_(0.008)TiO_3可以控制晶粒的生长,降低相对介电常数和介电损耗,使居里温度降低到较低的温度,并显着提高热效率。 BSYT陶瓷的稳定性。掺有1.6 wt。%Sb_2O_3的样品在1320℃下烧结2 h,具有较高的相对介电常数(> 1500),低介电损耗(<40 x 10〜(-4)),电容器的温度系数低等优点。 (<±35%)在-25℃至+ 85℃的宽温度范围内。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号