...
首页> 外文期刊>Materials Chemistry and Physics >Hydrothermal formation and characterization of magnesium oxysulfate whiskers
【24h】

Hydrothermal formation and characterization of magnesium oxysulfate whiskers

机译:氧硫酸镁晶须的水热形成与表征

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Magnesium oxysulfate (5Mg(OH)(2) (.)MgSO(4)(.)3H(2)O) whiskers with a diameter of 0.2-1.0 mum and a length of 20-50 mum were synthesized via the hydrothermal treatment of the slurry formed by mixing the MgSO4 and NaOH solutions at room temperature. The composition, morphology, structure and thermal behavior of the hydrothermal products were examined with X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermo-gravimetric analysis (TGA) and chemical analysis. The experimental results indicated that the process parameters, such as the concentration of the reactant, the dispersion of the Mg(OH)(2) Slurry and the temperature in. hydrothermal treatment should be controlled carefully to synthesis 5Mg(OH)(2) (.)MgSO(4)(.)3H(2)O whiskers and to avoid the formation of the sectorial or granular impurities. 5Mg(OH)(2)(.)MgSO(4)(.)3H(2)O whiskers were decomposed gradually and converted finally to MgO particles after being heated in air at temperature up to 1050degreesC. Granular products formed if the heating temperature was above 320degreesC. (C) 2004 Elsevier B.V. All rights reserved.
机译:硫酸氧镁(5Mg(OH)(2)(。)MgSOg(4)(。)3H(2)O)晶须的水热处理是合成直径0.2-1.0微米,长度20-50微米的晶须。通过在室温下混合MgSO4和NaOH溶液形成的浆液。通过X射线粉末衍射(XRD),扫描电子显微镜(SEM),透射电子显微镜(TEM),热重分析(TGA)和化学分析检查了水热产物的组成,形态,结构和热行为。实验结果表明,应小心控制反应参数的浓度,Mg(OH)(2)浆液的分散度和水热处理的温度等工艺参数,以合成5Mg(OH)(2)( 。)MgSO(4)(。)3H(2)O晶须,并避免形成扇形或颗粒状杂质。 5Mg(OH)(2)(。)MgSO(4)(。)3H(2)O晶须在空气中加热到1050摄氏度后逐渐分解,最终转化为MgO颗粒。如果加热温度高于320℃,则形成粒状产物。 (C)2004 Elsevier B.V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号