...
首页> 外文期刊>Materials & design >Tensile deformation behaviour of forged disc of IN 718 superalloy at 650 ℃
【24h】

Tensile deformation behaviour of forged disc of IN 718 superalloy at 650 ℃

机译:650℃IN 718高温合金锻造盘的拉伸变形行为。

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The tensile properties of forged disc of IN 718 superalloy were evaluated in the strain rate regime between 10~(-4) and 10~(-2) s~(-1) at 650 ℃. Flow oscillations were observed in stress-strain curves in the strain rate regime investigated. These flow oscillations were identified as strain increments attributed to twining mechanism at all the strain rates. However, presence of well defined serrations, temperature insen-sitivity of yield strength and increase in strain hardening exponent confirmed the occurrence of dynamic strain aging at 10~(-3)-10~(-2) s~(-1) strain rates. Deformation behaviour was observed to be planer in nature. Fracture features remained same (transgranular) in the strain rate regime studied.
机译:在650℃的10〜(-4)和10〜(-2)s〜(-1)的应变速率范围内,对IN 718高温合金的锻造圆盘进行了拉伸性能评估。在所研究的应变速率状态下,在应力-应变曲线中观察到流动振荡。这些流动振荡被确定为在所有应变率下归因于孪生机制的应变增量。然而,存在明确的锯齿,屈服强度的温度敏感性和应变硬化指数的增加证实了在10〜(-3)-10〜(-2)s〜(-1)应变速率下发生动态应变时效。观察到变形行为本质上是平坦的。在研究的应变速率方案中,断裂特征保持相同(经晶状)。

著录项

  • 来源
    《Materials & design》 |2010年第9期|P.4502-4507|共6页
  • 作者单位

    Defence Metallurgical Research Laboratory, Kanchanbagh, Hyderabad 500 058, India;

    rnDefence Metallurgical Research Laboratory, Kanchanbagh, Hyderabad 500 058, India;

    rnDefence Metallurgical Research Laboratory, Kanchanbagh, Hyderabad 500 058, India;

    rnDefence Metallurgical Research Laboratory, Kanchanbagh, Hyderabad 500 058, India;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号