Effects of Sn addition on as-cast microstructure, mechanical properties and casting fluidity of ZA84 magnesium alloy

摘要

The effects of Sn addition on the as-cast microstructure, mechanical properties and casting fluidity of the ZA84 magnesium alloy are investigated. The results indicate that adding 0.5-2.0 wt.%Sn to the ZA84 alloy not only can result in the formation of Mg_2Sn phase but also can refine the Mg_(32)(Al, Zn)_(49) phase and suppress the formation of Mg_(32)(Al, Zn)_(49) phase, and with the increase of Sn amount from 0.5 wt.% to 2.0 wt.%, the morphology of Mg_(32)(Al, Zn)_(49) phase gradually changes from coarse continuous and/or quasi-continuous net to relatively fine quasi-continuous and/or disconnected shapes. In addition, adding 0.5-2.0 wt.%Sn to the ZA84 alloy can improve the tensile and creep properties, and casting fluidity of the alloy. Among the Sn-containing ZA84 alloys, the ZA84 alloy added 1.0 wt.%Sn exhibits the best ultimate tensile strength, elongation and casting fluidity while the ZA84 alloy added 2.0 wt.%Sn has the best yield strength and creep properties.