...
首页> 外文期刊>Materials & design >Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation
【24h】

Dynamic recrystallization behavior of a typical nickel-based superalloy during hot deformation

机译:典型镍基高温合金在热变形过程中的动态再结晶行为

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The dynamic recrystallization (DRX) behavior of a typical nickel-based superalloy is investigated by the hot compression tests. Based on the conventional DRX kinetics model, the volume fractions of DRX are firstly estimated. Results show that there is an obvious deviation between the experimental and predicted volume fractions of DRX when the forming temperature is below 980 ℃, which is induced by the slow dynamic recrystallization rate under low forming temperatures. Therefore, the segmented models are proposed to describe the kinetics of DRX for the studied superalloy. Comparisons between the experimental and predicted results indicate that the proposed segmented models can give an accurate and precise estimation of the volume fractions of DRX for the studied superalloy. In addition, the optical observation of the deformed microstructure confirms that the dynamically recrystallized grain size can be well characterized by a power function of Zener-Hollumon parameter.
机译:通过热压缩试验研究了典型的镍基高温合金的动态重结晶(DRX)行为。在常规DRX动力学模型的基础上,首先估算了DRX的体积分数。结果表明,当成形温度低于980℃时,DRX的实验体积分数与预测的体积分数之间存在明显的偏差,这是由低成形温度下缓慢的动态再结晶速率引起的。因此,提出了分段模型来描述所研究的高温合金的DRX动力学。实验结果和预测结果之间的比较表明,所提出的分段模型可以对所研究的高温合金给出DRX的体积分数的准确准确的估计。另外,对变形的显微组织的光学观察证实,通过Zener-Hollumon参数的幂函数可以很好地表征动态再结晶的晶粒尺寸。

著录项

  • 来源
    《Materials & design》 |2014年第5期|568-577|共10页
  • 作者单位

    School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China State Key Laboratory of High Performance Complex Manufacturing, Changsha 410083, China;

    School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China State Key Laboratory of High Performance Complex Manufacturing, Changsha 410083, China;

    School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China State Key Laboratory of High Performance Complex Manufacturing, Changsha 410083, China;

    School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China State Key Laboratory of High Performance Complex Manufacturing, Changsha 410083, China;

    School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China State Key Laboratory of High Performance Complex Manufacturing, Changsha 410083, China;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Dynamic recrystallization; Nickel-based superalloy; Microstructure; Grain size;

    机译:动态重结晶;镍基高温合金;微观结构晶粒大小;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号