Low adhesion effect of TaO functional composite coating on the titanium cutting performance of coated cemented carbide insert

摘要

Adhesive wear is one of the major reasons for short tool life during machining titanium alloys. This study presents a new kind of low adhesive wear TaO functional coating prepared by magnetron sputtering. The composite coating is composed by two layers of a solid solution TiAITaN in bottom and a TaO (Ta2O5 or TaOx) on top. Tool life of the TiAITaN/TaO coatings is increased more than triple the TiAlTaN single coating by titanium cutting experiments. Cutting performance of commercial TiAlN-based coated tool is increased 267% after coating the TaO on the surface. Friction and wear between the coatings and Ti6Al4V counterpart have been conducted. The results show that both the friction coefficient of the coatings (from 1.05 to 0.82) and surface roughness (from 122 +/- 0.6 to 7.1 +/- 0.1 nm) are decreased by increasing TaO thickness from 0 to 150 nm. The adhesive bonds between coating and titanium also reduce with increasing the TaO thickness. This leads to the significantly reduction of the adhesion at the cutting tool tip after coated the TaO coating. This is because that the titanium is not easy to bind with the TaO coating by the calculated positive interaction energy between the Ta2O5 surface and pure Ti. (C) 2016 Elsevier Ltd. All rights reserved.