Determining Produced Water Originating Polycyclic Aromatic Hydrocarbons in North Sea Waters: Comparison of Sampling Techniques

摘要

A field study was carried out in the Norwegian sector of the North Sea during May and June 1997. The purpose was to measure the concentration of produced water originating polycyclic aromatic hydrocarbons (PAH) in seawater and to compare different sampling techniques for use in future monitoring programs. Three methods were used for direct water sampling: (1) in situ large volume sampling of particulate and dissolved hydrocarbons onto niters and XAD resins, (2) solid phase extraction (SPE) using polystyrene-divinylbenzene disks, (3) whole bulk water sampling. In addition, sampling by semi-permeable membrane devices (SPMDs) and blue mussels (Mytilus edulis) was used to obtain a 4 weeks average of the concentration of the target compounds in seawater. The samples were processed and analysed by GC-MS for determination of PAH concentrations. The measured concentrations were generally found to be low, and in many cases below the limits of detection. The comparison of sampling techniques showed that blue mussels and SPMDs are suitable for measuring PAH in both near-and far-field seawater. In situ large volume water sampling was also suitable for a wide range of PAH concentrations, but this technique was limited by high break-through of the low-molecular weight compounds, such as naphthalenes. The small sampling volumes limited the SPE and whole water sampling techniques, resulting in potential detection limit problems. These grab-sampling techniques may, however, be suitable for monitoring in the near-field areas around the platforms.