Sustainable design of rural roads with 2+1 road design: Levels of service and traffic flow performance

摘要

This paper provides research results of a study to assess the driver performance levels of a 2+1 road, a special type of road involving intermediate cross section that is applied where a four-lane roadway construction is unjustifiable and the use of a two-lane road design may not provide the desired level of mobility. Despite increased driver safety, the use of the 2+1 road involves a problem that the South Korean government cannot assess the mobility effects of 2+1 roads, because the current Korean Highway Capacity Manual lacks the level of service procedure for 2+1 roads. Hence, research is required to provide potential measures of effectiveness for describing traffic flows in 2+1 roads and establish a reliable level of service analysis procedure. To address this issue, we applied the following approach: (1) existing research concerning 2+1 road design and flow performance was reviewed; (2) a field study was conducted in 2+1 roads with video cameras and traffic detectors to investigate traffic flow conditions; (3) candidate measures of effectiveness for describing traffic flow in 2+1 roads were identified based on field study results as well as TWOPAS simulation efforts; and (4) an analysis procedure applicable to determine levels of traffic flow service for 2+1 roads was proposed. We also examined how our proposed procedure would perform based on a case study. It was found that the percent time spent following would represent the most appropriate measures of effectiveness and that realistic output may be produced with our proposed procedure.