Evaluation of Stress Intensity Factors in Biaxial Tensile Stress using Thermalelasticity and Photoelasticity

摘要

Stress intensity factor K is analyzed by measuring distribution of sum of the principal stresses around slit tip by an infrared stress measuring device. Under the biaxial tensile stress, both K-values of the isotropic materials with slit angle 0° and 45° show there is no influence of the slit angle at Mode Ⅰ. The tolerance of the measured K-values of the test specimens which are compared with measured K-values by photoelastic method are around 10-20% , and these increase as applied cyclic load increases. These tolerance can be reduced up to about 8% by modifying measurements. The effectiveness of the thermoelastic stress measurement method to K_I value analyzing under biaxial tensile stress was confirmed.