Pseudodynamic tests and earthquake response analysis of timber structures III: three-dimensional conventional wooden structures with plywood-sheathed shear walls

摘要

Pseudodynamic (PSD) tests were conducted on plywood-sheathed conventional Japanese three-dimensional (3D) wooden structures. Lateral load was applied to the edge beam of specimen structures to generate eccentricity loading. Specimens were based on a combination of shear walls with openings in the loading direction and horizontal diaphragms with different shear stiffness. The principle deformation of the horizontal diaphragm was torsion for rigid diaphragms and shear deformation for flexible diaphragms. Lumped-mass time-history earthquake response analysis was conducted on the tested structures, and additional calculations were conducted on structures with different eccentricity rates. Dynamic analyses were conducted by varying the masses and the resistance of the walls in the loading direction. The simulated peak displacement response in the loading plane agreed comparatively well with the PSD test results. The maximum displacement response on changing the wall resistant ratio showed almost the same tendency as that obtained by changing the mass ratio up to an eccentricity rate of 0.3; however, the maximum displacement response increased markedly beyond an eccentricity rate of 0.4. It was proved that the lumped-mass 3D model proposed in this study was appropriate for conducting a parameter study on the 3D dynamic behavior of timber structures.