...
首页> 外文期刊>Journal of the Mechanics and Physics of Solids >An experimental study of localized bulging in inflated cylindrical tubes guided by newly emerged analytical results
【24h】

An experimental study of localized bulging in inflated cylindrical tubes guided by newly emerged analytical results

机译:新出现的分析结果指导的充气圆柱管局部膨胀的实验研究

获取原文
获取原文并翻译 | 示例
           

摘要

An experimental study is conducted on localized bulging of inflated latex rubber tubes of a range of wall thicknesses and tube lengths, guided by newly emerged analytical results. In the case when the tube has one free closed end that may or may not be subjected to a dead weight, the initiation pressure for localized bulging is determined by a bifurcation condition, and the propagation pressure is determined by Maxwell's equal-area rule. It is shown that after bulge initiation the pressure will decrease monotonically towards, but will never reach, the propagation pressure, and it is when the pressure is sufficiently close to this propagation pressure that rapid propagation of the bulge in the axial direction takes place. It is found that the experimentally observed initiation pressure is around 15% below the theoretical prediction, which is consistent with the fact that bulging initiation is a sub-critical phenomenon and is therefore sensitive to imperfections. The experimentally observed propagation pressure is always very close to the theoretical prediction, which confirms the insensitivity of this pressure to imperfections and demonstrates the predictive power of the material model fitted from our own experiments on equibiaxial stretching. In the other case when the tube is first stretched and then fixed at both ends, bulge initiation takes place in the same manner as in the previous case, but the propagation pressure is no longer determined by Maxwell's equal-area rule. After bulge initiation the pressure will first decrease to a minimum and then rises slowly, and it is on the latter ascending path that the bulge starts to propagate rapidly in the axial direction. A semi-analytical method is proposed for the determination of the minimum pressure. Numerical simulations with the use of the software Abaqus are also conducted to verify the theoretical predictions. (C) 2018 Elsevier Ltd. All rights reserved.
机译:在新出现的分析结果的指导下,对壁厚和管长范围各不相同的充气乳胶橡胶管的局部鼓胀进行了实验研究。在管子的一个自由封闭端可能承受或不承受自重的情况下,局部胀大的起始压力由分叉条件确定,传播压力由麦克斯韦等面积法则确定。已经表明,在凸起开始之后,压力将朝着传播压力单调降低,但永远不会达到,并且当压力足够接近该传播压力时,凸起就会在轴向上快速传播。发现实验观察到的引发压力比理论预测值低约15%,这与以下事实相吻合:隆起引发是次临界现象,因此对瑕疵敏感。实验观察到的传播压力始终非常接近理论预测值,这证实了该压力对缺陷的不敏感性,并证明了根据我们自己的等双轴拉伸实验拟合的材料模型的预测能力。在另一种情况下,首先拉伸管然后将其固定在两端时,以与前一种情况相同的方式进行隆起引发,但是传播压力不再由麦克斯韦的等面积法则确定。凸起开始后,压力将首先减小到最小值,然后缓慢上升,并且在后一条上升路径上,凸起开始在轴向快速传播。提出了一种用于确定最小压力的半分析方法。还使用软件Abaqus进行了数值模拟,以验证理论预测。 (C)2018 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号