首页> 外文期刊>Journal of testing and evaluation >Performance Evaluation of Resistance Spot Welded Interstitial Free Steel Under Cryogenic Conditions
【24h】

Performance Evaluation of Resistance Spot Welded Interstitial Free Steel Under Cryogenic Conditions

机译:低温条件下电阻点焊间隙自由钢的性能评估

获取原文
获取原文并翻译 | 示例
       

摘要

Shear tensile (strain rate 10~2/s) performance of spot welded joints at cryogenic temperatures has been studied considering it as a simple method to indicate the crash resistance performance. The strength of different resistance spot welded joints of interstitial free steel under various heat input conditions has also been evaluated at room temperature for comparison. Micromechanism of fracture of the spot welded joints is investigated by scanning electron microscopy. Although an increase in shear tensile strength with decreasing test temperature is observed in all the spot welds, considerable variations in fracture mode exist in contrast to the room temperature test. The high heat input spot welds remain ductile at all test temperatures, however, low heat input welds become considerably brittle at cryogenic temperatures. Furthermore, medium heat input welds can maintain ductility until 0℃ and there is loss of ductility with further lowering of test temperature.
机译:研究了点焊接头在低温下的抗剪拉伸性能(应变率10〜2 / s),认为这是表明抗冲击性能的一种简单方法。还比较了室温下各种自由输入条件下间隙自由钢的不同电阻点焊接头的强度,以进行比较。通过扫描电子显微镜研究了点焊接头断裂的微观机制。尽管在所有点焊中均观察到剪切拉伸强度随测试温度的降低而增加,但与室温测试相比,断裂模式存在相当大的变化。高热量输入点焊在所有测试温度下均保持延性,但是,低热量输入焊点在低温下变得相当脆。此外,中热输入焊缝可保持延展性直至0℃,并且延展性降低,同时测试温度进一步降低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号