Preparation and characterization of porous Nb_2O_5 photocatalysts with CuO, NiO and Pt cocatalyst for hydrogen production by light-induced water splitting

摘要

In this study, porous Nb_2O_5 photocatalyst materials are prepared through thermal oxidation. According to X-ray photoelectron spectroscopy (XPS), at a temperature of 500 ℃, an optimum porous Nb_2O_5 photocatalyst is obtained with an O/Nb ratio close to the theoretical value of 2.5. The X-ray powder diffractometer (XRD) result shows that at the main diffraction angles of 22.63° and 28.33°, crystalline diffraction signals of Nb_2O_5 appear with corresponding diffraction planes of (001) and (180). When CuO, NiO and Pt catalysts are added to Nb_2O_5 as the cocatalyst for comparison, the maximum hydrogen production efficiency for a CuO/Nb_2O_5 photocatalyst is achieved (1405 μmol h~(-1) g~(-1)). However, when NiO and Pt are added as cocatalysts, the hydrogen production efficiencies are decreased to 800 μmol h~(-1) g~(-1) and 510 μmol h~(-1) g~(-1). respectively. Through the photoelectrochemicalanalysis.it finds that the CO signal peak with incomplete oxidation significantly increases as the reaction time increases, thus causing CO to adsorb on the catalyst surface (such as NiO or Pt) leading to catalyst poisoning. This results in reduced catalyst performance and hydrogen production rates.