首页> 外文期刊>Journal of Polymers and the Environment >Depolymerization of PLA by Phase Transfer Catalysed Alkaline Hydrolysis in a Microwave Reactor
【24h】

Depolymerization of PLA by Phase Transfer Catalysed Alkaline Hydrolysis in a Microwave Reactor

机译:通过相转移催化碱性水解在微波反应器中的碱化剂的解聚

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Poly(lactic acid) (PLA) is one of the most important polyester bioplastics, produced from agricultural renewable resources and due to its excellent properties already has found applications in several industrial sectors, including packaging. Its amount, relative to PET, in the waste stream is continuously increasing. Although waste bioplastics are biodegradable, the process sometimes needs long degradation times. Therefore, sufficient recycling techniques should be developed in terms of sustainable chemistry. Hydrolysis of PLA under microwave irradiation in an alkaline solution was investigated aiming in the chemical recycling of this biodegradable polymer and the recovery of the monomer, lactic acid. Several process parameters were examined, including the presence or not of an alkali solution, its amount and concentration, the presence or not of methanol in the reaction medium, together with reaction temperature and time. Moreover, several phase transfer catalysts were employed at various relative amounts to PLA. Reaction temperature, pressure and microwave power did not change significantly during degradation. Optimum experimental conditions, leading to PLA degradation more than 90%, were achieved using hexadecyltrimethylammonium bromide as phase transfer catalyst in a 10% w/v NaOH medium at 100 degrees C for 10 min irradiation time. Using such low temperature and degradation times results in great environmental benefit since it does not consume significant amount of energy compared to other similar techniques proposed in literature and thus leads to the sustainability of the process. Therefore, it seems to be a very efficient method to be used in the recycling of large amounts of this polymer.
机译:聚(乳酸)(PLA)是来自农业可再生资源生产的最重要的聚酯生物塑料之一,由于其优异的性能已经发现了几个工业部门的应用,包括包装。它的金额相对于宠物在废物流中是不断增加的。虽然废物生物塑料是可生物降解的,但过程有时需要长期降解时间。因此,应在可持续化学方面开发足够的回收技术。研究了PLA在碱性溶液中微波辐射的水解,旨在该可生物降解聚合物的化学回收和单体,乳酸的回收。检查几种方法参数,包括碱溶液的存在,其量和浓度,反应介质中甲醇的存在或不存在,以及反应温度和时间。此外,几种相转移催化剂以各种相对量的PLA使用。在降解期间,反应温度,压力和微波功率不会显着变化。使用十六烷基三甲基溴化铵作为相转移催化剂以10%w / v NaOH培养基,在100℃下以100摄氏度的辐射时间来实现最佳的实验条件,从而降低了90%以上。使用这种低温和降解时间导致了很大的环境效益,因为与文献中提出的其他类似技术相比,它不会消耗大量的能量,从而导致该过程的可持续性。因此,似乎是一种非常有效的方法,用于循环大量该聚合物。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号