...
首页> 外文期刊>Journal of Membrane Science >Effects of net-type spacers on heat and mass transfer in direct contact membrane distillation and comparison with ultrafiltration studies
【24h】

Effects of net-type spacers on heat and mass transfer in direct contact membrane distillation and comparison with ultrafiltration studies

机译:净间隔物对直接接触膜蒸馏中传热和传质的影响以及与超滤研究的比较

获取原文
获取原文并翻译 | 示例
           

摘要

The study of heat and mass transfer enhancement in direct contact membrane distillation (DCMD) by the net-type spacers was intended to develop the heat transfer correlation for the spacer-filled channels. DCMD experiments performed with 20 spacers different in voidages and hydrodynamic angles were used to determine the spacer performance in heat and mass transfer enhancement. The effect of high mass transfer rates on heat and mass transfer coefficients was also investigated to explain the experimental results compared with ultrafiltration (UF) with the spacers. The results showed that spacers enhanced mass fluxes up to 60% and increased heat transfer coefficients by approximately two times over the empty channels. The optimum spacer geometry was found at the voidage and hydrodynamic angle of 0.6 and 90°, respectively. The heat transfer correlation for spacer-filled channel was obtained. The analysis of high mass transfer rate convection showed that the effect of high mass transfer rates on mass transfer coefficients was remarkable for ultrafiltration but was insignificant for membrane distillation.
机译:通过网型垫片研究直接接触膜蒸馏(DCMD)中传热和传质的增强,旨在开发填充垫片的通道的传热相关性。使用20个空隙度和流体动力角不同的垫片进行的DCMD实验,用于确定垫片在传热和传质方面的性能。还研究了高传质速率对传热和传质系数的影响,以解释与带隔垫的超滤(UF)相比的实验结果。结果表明,隔板在空通道上的质量通量提高了60%,传热系数提高了大约两倍。在空隙度和流体动力角分别为0.6和90°时发现了最佳的垫片几何形状。获得了填充间隔物的通道的传热相关性。高传质速率对流的分析表明,高传质速率对传质系数的影响对于超滤而言是显着的,但对于膜蒸馏而言则是微不足道的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号