首页> 外文期刊>Journal of Hydraulic Engineering >Axisymmetric Underflows from Impinging Buoyant Jets of Dense Cohesive Particle-Laden Fluids
【24h】

Axisymmetric Underflows from Impinging Buoyant Jets of Dense Cohesive Particle-Laden Fluids

机译:稠密内含颗粒流体撞击浮力射流的轴对称底流

获取原文
获取原文并翻译 | 示例
           

摘要

Underflows generated from the impingement of descending dense cohesive particle-laden buoyant jets on a horizontal bottom of a water body were investigated theoretically and experimentally. Laboratory experiments were conducted by discharging fluid mud (suspension of cohesive clay particles in water) at a constant volume flow rate from a submerged vertical pipe into a body of water. The experiments involved a wide range of initial parameters (e. g., height of the discharge pipe from the bottom, flow rate, and concentration of the fluid mud at the time of discharge). The discharged fluid mud descended as vertical buoyant jets and flowed away as axisymmetric underflows after impinging on the bottom. The underflows exhibited two well-documented propagation phases: (1) a radial momentum-driven wall jet phase near the impingement region, and (2) an inertial gravity current phase after the completion of the wall jet phase. Experiments revealed that, depending on the initial discharge parameters, underflows underwent a viscous propagation phase in which the propagations were influenced by the non-Newtonian rheology of the discharged fluid mud. The dynamics of the propagation phases of underflows were analyzed and compared with previous studies on saline underflows. The radial wall jet lengths (radial extent of underflows at which they transitioned from the wall jet phase to the inertial gravity current phase) were found to scale on the characteristic jet length scale and discharge source-bottom separation distance when the buoyant jets impinge on the bottom as momentum-dominated jets. When the buoyant jets impinge on the bottom as buoyancy-dominated plumes, however, they scaled with only the source-bottom separation distance. Radial wall jet length parameterizations for both types of the impingements were developed. The predictive capabilities of two different shallow water model solutions were tested for the inertial propagation of fluid mud gravity currents. The transitions of fluid mud underflows into a viscous propagation phase were analyzed in terms of the discharge parameters and their non-Newtonian rheology. A box model solution for the viscous propagation of axisymmetric non-Newtonian gravity currents was developed. Predictions of the developed box model were then evaluated using the authors' experimental observations. Of those underflows in which viscous propagation occurred, few showed an abrupt settling phenomenon after propagating some distance in the viscous propagation phase in which clay particles abruptly settled en masse from the underflows and only a turbidity cloud propagated. Discussions on the abrupt settling phenomena are also provided. (C) 2014 American Society of Civil Engineers.
机译:从理论上和实验上研究了下降的稠密的含颗粒浮力喷射流撞击水体水平底部时产生的底流。通过以恒定的体积流量将液体泥浆(粘性粘土颗粒在水中的悬浮液)从浸没的垂直管排放到水体中来进行实验室实验。实验涉及广泛的初始参数(例如,排放管距底部的高度,流量和排放时流体泥浆的浓度)。排出的泥浆以垂直浮力射流的形式下降,并在撞击底部后以轴对称底流的形式流走。底流表现出两个有据可查的传播阶段:(1)撞击区域附近的径向动量驱动壁射流阶段;(2)壁射流阶段完成后的惯性重力流阶段。实验表明,根据初始排放参数,底流会经历粘性传播阶段,在该阶段,传播受到排出的泥浆的非牛顿流变学的影响。分析了底流传播阶段的动力学,并将其与以前对盐水底流的研究进行了比较。发现径向壁射流长度(底流从壁射流阶段过渡到惯性重力流阶段的底流的径向程度)与特征射流长度尺度成比例,并且当浮力射流撞击到水流时,排放源-底部分离距离成比例。底部为以动量为主的飞机。但是,当浮力射流以浮力为主的羽流撞击底部时,它们仅以源底分离距离缩放。开发了两种冲击的径向壁射流长度参数化。测试了两种不同的浅水模型解决方案对流体泥浆重力流的惯性传播的预测能力。根据排放参数及其非牛顿流变学,分析了流体泥浆底流向粘性传播相的过渡。提出了一种轴对称非牛顿重力流粘性传播的箱模型解。然后使用作者的实验观察评估开发的盒模型的预测。在发生粘性传播的那些底流中,很少有人在粘性传播阶段传播一定距离后出现突然的沉降现象,在该距离内,粘土颗粒从底流中突然大量沉降,只有浊度云散布了。还提供了有关突然沉降现象的讨论。 (C)2014年美国土木工程师学会。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号