Evaluation of dioxins and dioxin-like compounds from a cement plant using carbide slag from chlor-alkali industry as the major raw material

摘要

Carbide slag produced from chlor-alkali industry contains high amounts of calcium compounds and can potentially be used as raw material for cement production; however, it contains large amounts of chlorine so it is essential to evaluate the emissions of chlorinated organic pollutants, including polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polychlorinated naphthalenes (PCNs). A field study of the emission profiles of these pollutants in a cement plant using such slag was performed. The average concentrations of PCDD/Fs, PCBs, and PCNs in stack gases collected at the kiln back end were 6.31, 1.07, and 31.89 pg TEQ m(-3), respectively. PCDFs dominated over PCDDs in particulate samples. Di- to pentachlorinated biphenyls were dominant homologs in the particulate samples. MonoCBs were the dominant homolog in stack gases from the kiln back end, and homolog concentrations decreased with increasing chlorine numbers. Mono- and diCNs accounted for 48-98% of PCNs. The estimated toxic equivalents of stack gas emissions of PCNs, classified as new persistent organic pollutants under Stockholm Convention, were unexpectedly higher than those of PCDD/Fs and PCBs. A mass balance indicated that all of the toxic equivalents were reduced by this cement kiln system. The highest 2,3,7,8-PCDD/F output is with clinker. (C) 2017 Elsevier B.V. All rights reserved.