Design and Flight Evaluation of Primary Control System for Learjet-25B Aircraft

摘要

In this paper, a multi-input/multi-output servomechanism primary flight controller is presented. Also discussed are flight data related to the system performance and pilot assessments of handling qualities. The data were collected during flight-test experiments (March 2018) on the Calspan Variable Stability In-Flight Simulator Learjet-25B aircraft. Aircraft body angular rates and linear accelerations are used to enable decoupled command tracking in pitch, roll, and yaw axes. Angle of attack and angle of sideslip measurements are not required for the system to operate. The developed primary flight controller translates pilot controls into the corresponding pitch, roll, and yaw commands for the aircraft to track. The system consists of a gain-scheduled robust linear baseline augmented with a direct adaptive model reference output feedback. The baseline is designed via the Observer-Based Loop Transfer Recovery method. The adaptive component incorporates the closed-loop reference model, whereby a state observer from the baseline Observer-Based Loop Transfer Recovery system also acts as the reference model for the adaptive augmentation. In March 2018, the Observer-Based Loop Transfer Recovery controller was successfully flight verified on the Calspan Learjet-25B aircraft, at the U.S. Air Force Test Pilot School, Edwards Air Force Base, California. Flight-test results are discussed, and a brief summary is given at the end.