首页> 外文期刊>Journal of Geodesy >Orbit and clock analysis of BDS-3 satellites using inter-satellite link observations
【24h】

Orbit and clock analysis of BDS-3 satellites using inter-satellite link observations

机译:使用卫星间链接观测的BDS-3卫星的轨道和时钟分析

获取原文
获取原文并翻译 | 示例
           

摘要

Abstract China is currently focusing on the establishment of its BDS-3 system, and a BDS-3 constellation with 18 satellites in medium Earth orbit (MEO) and one satellite in geostationary Earth orbit (GEO) has been able to provide preliminary global services since the end of 2018. These BDS-3 satellites feature the inter-satellite link (ISL) and new high-quality onboard clocks. In this study, we present the analysis of BDS-3 orbits and clocks determined by Ka-band ISL measurements from 18 MEO satellites and one GEO satellite. The ISL data of 43 days from 1 January to 12 February 2019 are used. The BDS-3 ISL measurement is described by a dual one-way ranging model. After converting bidirectional observations to the same epoch, Ka-band clock-free and geometry-free observables are obtained by the addition and subtraction of dual one-way observations, respectively. One anchor station with Ka-band bidirectional observations is introduced into the orbit determination to provide the orientation constraints. Using Ka-band clock-free observables, BDS-3 satellite orbits are determined. The ISL hardware delays are estimated together with orbits, and the resulting hardware delay estimates are quite stable with STD of about 0.03 ns. The Ka-band orbits are evaluated by orbit overlap differences, comparison with L-band precise orbits, and satellite laser ranging validation. The results indicate that the radial orbit errors are on the 2–4 cm level for MEO satellites and 8–10 cm for the GEO satellite. In addition, we investigate the ground anchoring capability by adding one anchor station and reducing the amount of data of the anchor station. Using Ka-band geometry-free observables, BDS-3 satellite clocks are estimated and the RMS of post-fit ISL residuals is about 5 cm. The Ka-band clock offsets are analyzed and compared with L-band precise clocks. Independent of orbit errors, the Allan deviation of Ka-band clocks for averaging interval longer than 5000 s is superior to that of L-band clocks. Furthermore, a pronounced bump, which appears in the Allan deviation of L-band clocks, almost vanishes in Ka-band clocks. Finally, the periodic variations are detected for L-band and Ka-band clocks.
机译:摘要中国目前正在专注于建立其BDS-3系统,并在地球轨道(MEO)中具有18个卫星的BDS-3星座和地球地球地球地球轨道(地理)的一颗卫星以获得初步全球服务2018年底。这些BDS-3卫星具有卫星间链路(ISL)和新型高质量的钟表。在这项研究中,我们介绍了由18 Meo卫星和一个地理卫星测量的KA波段ISL测量确定的BDS-3轨道和时钟。从1月1日至2019年2月12日起43天的ISL数据。 BDS-3 ISL测量由双单向测距模型描述。在将双向观察转换为相同的时期之后,通过添加和减法双单向观察分别获得了无KA波段的无线和几何观察。将具有KA带双向观测的一个锚站引入到轨道确定中以提供方向约束。使用KA波段无需观察到,确定BDS-3卫星轨道。 ISL硬件延迟估计与轨道一起估计,并且由此产生的硬件延迟估计与大约0.03ns的STD非常稳定。通过轨道重叠差异,与L波段精确轨道和卫星激光测距验证进行评估。结果表明,径向轨道误差是Meo卫星的2-4厘米水平,对于Geo卫星为8-10厘米。另外,我们通过添加一个锚固站并减少锚固站的数据量来研究地锚固能力。使用无ka波段几何观察到,估计BDS-3卫星时钟,并且贴合的ISL残留的RMS约为5厘米。分析了KA波段时钟偏移,并与L波段精确时钟进行了比较。独立于轨道误差,KA波段时钟的allan偏差平均间隔长于5000 s的偏差优于L波段时钟。此外,在L波段时钟的Allan偏差中出现明显的凹凸,几乎消失在KA波段时钟。最后,针对L波段和KA波段时钟检测定期变化。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号