首页> 外文期刊>Journal of food engineering >Influence of whip speed ratios on the inclusion of air into a bakery foam produced with a planetary mixer device
【24h】

Influence of whip speed ratios on the inclusion of air into a bakery foam produced with a planetary mixer device

机译:搅打速度比对用行星式混合器设备生产的面包房泡沫中夹杂空气的影响

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

In the present study, dimensional analysis has been developed in order to identify the ratios governing the foam development network, with mixers combining dual whip revolution speeds. It is first suggested that, for a given planetary whip mixer and foaming solution, the set of dimensionless ratios characterizing the course of gas hold-up can be reduced to modified Froude and revolution numbers, as in the case of a classical mixing system. This requires the introduction of a characteristic velocity, instead of the two individual rotational speeds of the whip, in the corresponding list of governing parameters. An analytical expression for this characteristic velocity is then proposed, and gas hold-up measurements are made at various whip speed ratios, using a given food model-recipe, containing whole eggs and sugar. Our experimental results were evaluated, in order to validate the proposed dimensional analysis. It is shown that the aeration process requires a very low, modified revolution number to reach steady state values. It is also shown that the asymptotic values of gas hold-up are influenced by the modified Froude number. Depending on the values of the modified Froude number, it is noted that coalescence can occur, which then contributes to a reduction in gas hold-up. It has also been established that the modified Froude number can account for the eccentricity of planetary mixers, and consequently, that this number is a robust indicator for the determination of the optimum gas hold-up value, when air incorporation is produced by various planetary whipping devices. The results described in this paper enable foaming processes using planetary whipping mixers to be optimized, by proposing a framework in which the impeller speed ratio and aeration time can be set in such a way as to control the simultaneous entrainment and disentrain-ment of gas. Finally, this work can be further extended to other gas/liquid applications in which planetary mixers are used, such as surface aeration in wastewater treatment plants.
机译:在本研究中,已经进行了尺寸分析,以识别控制泡沫形成网络的比例,并使用混合了双鞭转速的混合器。首先建议,对于给定的行星式搅拌器和发泡溶液,可以将表征气体滞留过程的无因次比集减少为修改后的弗洛德数和转数,就像在传统混合系统中一样。这要求在相应的控制参数列表中引入特征速度,而不是鞭子的两个单独的转速。然后提出了该特征速度的解析表达式,并使用给定的包含完整鸡蛋和糖的食物模型配方,以各种鞭速比进行气体滞留量测量。我们的实验结果进行了评估,以验证所提出的尺寸分析。结果表明,充气过程需要非常低的修改转速才能达到稳态值。还表明,气体滞留率的渐近值受修正的弗洛德数影响。根据修改后的弗洛德数的值,应注意会发生聚结,从而有助于减少气体滞留量。还已经确定,修正的弗洛德数可以解释行星混合器的偏心率,因此,当通过各种行星搅动产生的空气掺入时,该数字是确定最佳气体滞留值的有力指标。设备。本文描述的结果通过提出一个框架来优化使用行星式搅打混合器的发泡过程,在该框架中可以设置叶轮速度比和充气时间,从而控制气体的同时夹带和夹带。最后,这项工作可以进一步扩展到其他使用行星式混合器的气/液应用中,例如废水处理厂的表面曝气。

著录项

  • 来源
    《Journal of food engineering》 |2012年第4期|p.532-540|共9页
  • 作者单位

    NRA, UR638, P1HM, 369 Rue Jules Guesde BP20039, 59 651 Villeneuve d'Ascq Cedex. France,AgroParisTech, UMR1145 Ingenierie Procedes Aliments, F-91300 Massy, France,INRA, UMR1145 Ingenierie Procedes Aliments, F-91300 Massy, France,Le Cnam, UMR1145 Ingenierie Procedes Aliments, F-91300 Massy, France;

    VMl Petrins et Melangeurs, Z.I. Nord, 85607 Montaigu Cedex, France;

    VMl Petrins et Melangeurs, Z.I. Nord, 85607 Montaigu Cedex, France;

    AgroParisTech, UMR1145 Ingenierie Procedes Aliments, F-91300 Massy, France,INRA, UMR1145 Ingenierie Procedes Aliments, F-91300 Massy, France,Le Cnam, UMR1145 Ingenierie Procedes Aliments, F-91300 Massy, France;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    surface aeration; gas hold-up; overrun; foam; mass transfer; planetary mixer; dimensionless;

    机译:表面曝气气体滞留超限泡沫;传质行星搅拌机无量纲;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号