Forced Low-Frequency Spray Characteristics of a Generic Airblast Swirl Diffusion Burner

摘要

The low-frequency response of the spray from a generic airblast diffusion burner with a design typical of an engine system has been investigated as pan of an experimental study to describe the combustion oscillations of aeroengine combustors called rumble. The atomization process was separated from the complex instability mechanism of rumble by using sinusoidal forcing of the air mass flow rate without combustion. Pressure drop across the burner and the velocity on the burner exit were found to follow the steady Bernoulli equation. Phase-locked particle image velocimetry measurements of the forced velocity field of the burner show quasisteady behavior of the air flow field. The phase-locked spray characteristics were measured for different fuel flow rates. Here again quasi-steady behavior of the atomization process was observed. With combustion, the phase-locked Mie-scattering intensity of the spray cone was found to follow the spray behavior measured in the noncombusting tests. These findings lead to the conclusion that the unsteady droplet Sauter mean diameter mean and amplitude of the airblast atomizer can be calculated using the steady-state atomization correlations with the unsteady burner air velocity.