Limiting Law of the Reinforcement of Rubber

摘要

The effect of the filler upon the modulus of compounded rubber has been calculated with the aid of some simplifying assumptions. From these calculations it is found that the increase in modulus, caused by the filler, is directly proportional to the volume loading, and is independent of the particle size of the filler. The stress system in the vicinity of a spherical filler particle has also been calculated. A series of experiments has been made to check these calculations. From the results of these experiments, it has been deduced that carbon black is flocculated in rubber; and that P‐33, Thermax, and Gilder's whiting are completely dispersed in rubber. These last‐named fillers give increases in modulus substantially in agreement with the calculations. It has further been found that Kadox and XX zinc oxide give unusually large increases in modulus. These are ascribed to alteration of the type of cure of the rubber matrix. Catalpo clay showed excessive modulus because of high calender grain.