...
首页> 外文期刊>Journal of applied mathematics and mechanics >Axisymmetric contact problems for a prestressed incompressible elastic layer
【24h】

Axisymmetric contact problems for a prestressed incompressible elastic layer

机译:预应力不可压缩弹性层的轴对称接触问题

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Two axisymmetric problems of the indentation without friction of an elastic punch into the upper face of a layer when there is a uniform field of initial stresses in the layer are considered. The model of an isotropic incompressible non-linearly elastic material, specified by a Mooney potential, is used. Two cases are investigated: when the lower face of the layer is rigidly clamped after it is prestressed, and when the lower face of the layer is supported on a rigid base without friction after it is prestressed. It is assumed that the additional stresses due to the action of the punch on the layer are small compared with the initial stresses; this enables the problem of determining the additional stresses to be linearized. The problem is reduced to solving integral equations of the first kind with symmetrical irregular kernels relative to the pressure in the contact area. Approximate solutions of the integral equations are constructed by the method of orthogonal polynomials for large values of the parameter characterizing the relative layer thickness. The case of a punch with a plane base is considered as an example.
机译:当在层中存在均匀的初始应力场时,考虑了在没有弹性冲头摩擦到层的上表面的情况下压痕的两个轴对称问题。使用由门尼电位指定的各向同性不可压缩的非线性弹性材料模型。研究了两种情况:预应力后将层的下表面牢固地夹紧,预应力后将层的下表面无摩擦地支撑在刚性基底上。假定由于冲头作用在层上而产生的附加应力与初始应力相比较小。这使得确定附加应力的问题能够线性化。该问题减少到求解第一类具有相对于接触区域中的压力对称的不规则核的积分方程。积分方程的近似解是通过正交多项式的方法构造的,用于表征相对层厚度的较大参数值。以具有平面基座的冲头的情况为例。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号