The authors conducted vertical loading tests on a model screw pile in a calibration chamber where the different mechanism of toe resistance mobilizing at the closed end and helical screw was in focus. Layered sand deposits were prepared in two different densities concerning relative position of the pile toe and the thin layer around it. A new formula to evaluate the toe resistance of a screw pile is proposed based on the test results. The formula shows fairly good applicability to estimate the toe resistance of full-scale piles by taking different soil modulus at the closed end and helical screw.%回転貫入杭の鉛直荷重時における先端面と羽根面の荷重分担が,荷重レベルに応じて変化する挙動を調べた研究であり,大変興味深く拝見した。著者らはぎらに,杭の許容支持力にこの荷重分担を取り入れた考え方を提案しているが,それに対して筆者は異論がある。それは,式(5)や(6)における「支持力発揮率」は全支持力に一つの全体安全率を適用するものと何ら変わりがないからである。この考え方は,かって建築学会基礎構造設計指針の1988年版において,杭先端支持力と周面抵抗力に「寄与係数」という部分係数を適用する考えが示されたことがあるが,それと同種のものであり,いわゆる限界状態設計における部分係数とは異なるものである。部分係数は本来その抵抗要素の算定法の信頼性などに応じて決定すべきものであり,許容支持力レベルの荷重時の単なる荷重分担ではない。回転貫入杭の先端面と羽根面の抵抗の信頼度や冗長性などを考慮した部分係数の提案が望まれる。
展开▼