Creating the virtual Eiger North Face

摘要

The described activities aim at combining the potentials of photogrammetry, remote sensing, digital cartography and virtual reality/photorealism with the needs of modern spatial information systems for tourism and for alpinism in particular (the latter aspect is, however, not covered in the paper). Since for slopes steeper than 45°, a digital relief model in nadir projection cannot adequately depict the terrain even in low-angle views, digital Steep Slope Models (SSMs) with a rather vertical reference plane are desirable. This condition very much applies to the Eiger North Face which has been chosen as a testbed for the realisation of a virtual rock face and which shall later be embedded into a lower resolution synthetic landscape of the Eiger-Moench-Jungfrau Region generated from a DTM and satellite imagery. Our "SSM approach" seems justified by the fact that except for the visualisation, commercial software was used which is very limited both in DTM modelling and texture mapping. For the creation of the actual SSM, a pair of oblique coloured air photos has been used, resulting in both a digital face model of 3.7 m grid size and an orthophoto with a resolution of 0.25 m. To demonstrate the alpinistic potential of the product, climbing routes have been inserted into the face model, thus enabling even non-experienced individuals to enjoy the "virtual reality conquest" of the Eiger North Face and potential climbing candidates to prepare themselves for the actual "real world" enterprise.