首页> 外文期刊>ISPRS Journal of Photogrammetry and Remote Sensing >Levee crest elevation profiles derived from airborne lidar-based high resolution digital elevation models in south Louisiana
【24h】

Levee crest elevation profiles derived from airborne lidar-based high resolution digital elevation models in south Louisiana

机译:从路易斯安那州南部基于机载激光雷达的高分辨率数字高程模型得出的堤坝高程剖面

获取原文
获取原文并翻译 | 示例
           

摘要

This study explores the feasibility of using airborne lidar surveys to construct high-resolution digital elevation models (DEMs) and develop an automated procedure to extract levee longitudinal elevation profiles for both federal levees in Atchafalaya Basin and local levees in Lafourche Parish, south Lousiana. This approach can successfully accommodate a high degree of levee sinuosity and abrupt changes in levee orientation (direction) in planar coordinates, variations in levee geometries, and differing DEM resolutions. The federal levees investigated in Atchafalaya Basin have crest elevations between 5.3 and 12 m while the local counterparts in Lafourche Parish are between 0.76 and 2.3 m. The vertical uncertainty in the elevation data is considered when assessing federal crest elevation against the U.S. Army Corps of Engineers minimum height requirements to withstand the 100-year flood. Only approximately 5% of the crest points of the two federal levees investigated in the Atchafalaya Basin region met this requirement. Published by Elsevier B.V. on behalf of International Society for Photogrammetry and Remote Sensing, Inc.
机译:这项研究探索了使用机载激光雷达勘测来构建高分辨率数字高程模型(DEM)并开发一种自动程序以提取位于路易斯安那州南部Atchafalaya盆地和拉福什教区的本地堤防的堤防纵向高程剖面的可行性的方法。这种方法可以成功地适应高度的堤岸弯曲度和平面坐标中堤岸方向(方向)的突然变化,堤岸几何形状的变化以及不同的DEM分辨率。在Atchafalaya盆地进行调查的联邦堤防波峰高程在5.3至12 m之间,而Lafourche Parish的当地堤坝高程在0.76至2.3 m之间。在根据美国陆军工程兵团承受100年洪水的最低高度要求评估联邦最高海拔时,应考虑高程数据的垂直不确定性。在阿查法拉雅盆地地区调查的两个联邦堤坝中,只有大约5%的波峰点满足了这一要求。由Elsevier B.V.代表国际摄影测量与遥感学会出版。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号