...
首页> 外文期刊>International Journal of Reliability, Quality and Safety Engineering >RELIABILITY AND MODELING OF SYSTEMS INTEGRATED WITH FIRMWARE AND HARDWARE
【24h】

RELIABILITY AND MODELING OF SYSTEMS INTEGRATED WITH FIRMWARE AND HARDWARE

机译:固件和硬件集成的系统的可靠性和建模

获取原文
获取原文并翻译 | 示例

摘要

Firmware is embedded software in hardware devices and they play important role for many critical systems' function. Firmware failure rate in operation should be quite lower than the application software which is operating on it. Most of the study on software reliability deals with systems during development, and it is also important to study the integrated system during operation. Complex systems usually have a bathtub-shaped failure rate over the lifecycle of the product. This paper discusses the parametric analysis of model given by Haupt and Schaebe (1992), exponentiated Weibull distribution and models generated from Pareto and Weibull distribution, as well as their possible application to modeling firmware system failure. In addition, the Safety Integrity Levels (SIL) stipulated in IEC 61508 are taken into account in the modeling since the safety-critical systems in general are firmware-dominated.
机译:固件是硬件设备中的嵌入式软件,它们对于许多关键系统的功能起着重要作用。运行中的固件故障率应大大低于其上运行的应用程序软件。关于软件可靠性的大多数研究涉及开发过程中的系统,并且在运行过程中研究集成系统也很重要。在产品的整个生命周期中,复杂的系统通常具有类似浴缸的故障率。本文讨论了Haupt和Schaebe(1992)给出的模型的参数分析,指数Weibull分布以及从Pareto和Weibull分布生成的模型,以及它们在建模固件系统故障中的可能应用。此外,在建模中考虑了IEC 61508中规定的安全完整性等级(SIL),因为安全关键系统通常以固件为主。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号