首页> 外文期刊>International journal of hydrogen energy >High-pressure hydrogen production with inherent sequestration of a pure carbon dioxide stream via fixed bed chemical looping
【24h】

High-pressure hydrogen production with inherent sequestration of a pure carbon dioxide stream via fixed bed chemical looping

机译:通过固定床化学回路固有地隔离纯二氧化碳流的高压氢气生产

获取原文
获取原文并翻译 | 示例
       

摘要

The proof of concept for the production of pure pressurized hydrogen from hydrocarbons in combination with the sequestration of a pure stream of carbon dioxide with the reformer steam iron cycle is presented. The iron oxide based oxygen carrier (95% Fe2O3, 5% Al2O3) is reduced with syngas and oxidized with steam at 1023 K. The carbon dioxide separation is achieved via partial reduction of the oxygen carrier from Fe2O3 to Fe3O4 yielding thermodynamically to a product gas only containing CO2 and H2O. By the subsequent condensation of steam, pure CO2 is sequestrated. After each steam oxidation phase, an air oxidation was applied to restore the oxygen carrier to hematite level. Product gas pressures of up to 30.1 bar and hydrogen purities exceeding 99% were achieved via steam oxidations. The main impurities in the product gas are carbon monoxide and carbon dioxide, which originate from solid carbon depositions or from stored carbonaceous molecules inside the pores of the contact mass. The oxygen carrier samples were characterized using elemental analysis, BET surface area measurement, XRD powder diffraction, SEM and light microscopy. The maximum pressure of 95 bar was demonstrated for hydrogen production in the steam oxidation phase after the full oxygen carrier reduction, significantly reducing the energy demand for compressors in mobility applications. (C) 2019 The Authors. Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC.
机译:提出了从烃生产纯净加压氢气并结合重整器蒸汽铁循环分离纯净二氧化碳物流的概念证明。基于氧化铁的氧气载体(95%Fe2O3、5%Al2O3)被合成气还原,并在1023 K下被蒸汽氧化。二氧化碳的分离是通过将氧气载体从Fe2O3部分还原为Fe3O4进行的,热力学上产生为产物气仅包含CO2和H2O。通过随后的蒸汽冷凝,纯净的二氧化碳被隔离。在每个蒸汽氧化阶段之后,进行空气氧化以使氧气载体恢复到赤铁矿水平。通过蒸汽氧化获得了高达30.1 bar的产品气体压力和超过99%的氢气纯度。产物气体中的主要杂质是一氧化碳和二氧化碳,它们来自固体碳沉积物或接触物质的孔内部储存的碳质分子。使用元素分析,BET表面积测量,XRD粉末衍射,SEM和光学显微镜对氧气载体样品进行表征。氧载体完全还原后,在蒸汽氧化阶段产生氢气的最大压力达到95 bar,这大大降低了移动应用中压缩机的能源需求。 (C)2019作者。由Elsevier Ltd代表Hydrogen Energy Publications LLC发布。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号