首页> 外文期刊>International Journal of Heat and Mass Transfer >Physical Mechanisms Of Heat Transfer During Single Bubble Nucleate Boiling Of Fc-72 Under Saturation Conditions-i. Experimental Investigation
【24h】

Physical Mechanisms Of Heat Transfer During Single Bubble Nucleate Boiling Of Fc-72 Under Saturation Conditions-i. Experimental Investigation

机译:饱和条件下Fc-72单泡核沸腾过程中传热的物理机制-i。实验研究

获取原文
获取原文并翻译 | 示例
           

摘要

This paper is the first of a two-part study concerning the dynamics of heat transfer during nucleation process of saturated FC-72 liquid. Experimental results discussed in this paper provide new physical insight on the nature of heat transfer events at the nucleation site during the nucleate boiling process. The thermal field underneath a bubble during the boiling of FC-72 was measured with a spatial resolution of 22-40 μm. The time period of activation, area of influence, and magnitude of three different mechanisms of heat transfer active at the nucleation site were determined. These mechanisms consisted of: (1) micro-layer evaporation following the rapid bubble expansion, (2) transient conduction due to rewetting of the surface during bubble departure, and (3) microconvection in the region external to the bubble/surface contact area. The area of influence of the transient conduction mechanism was found to be limited to the bubble/surface contact area, with most of the heat transfer occurring prior to the bubble detachment from the surface. The microconvection heat transfer mechanism was localized primarily outside the contact area and was found to be steady in nature. All three mechanisms of heat transfer were found to make significant contributions to the total surface heat transfer. The second part of this study provides the theoretical analysis of the results.
机译:本文是关于饱和FC-72液体成核过程中传热动力学的两部分研究的第一篇。本文讨论的实验结果为成核沸腾过程中成核部位传热事件的性质提供了新的物理见解。以22-40μm的空间分辨率测量了FC-72沸腾过程中气泡下方的热场。确定了激活的时间段,影响的面积以及在成核位点活跃的三种不同传热机制的强度。这些机制包括:(1)气泡快速膨胀后的微层蒸发;(2)气泡离开过程中由于表面重新润湿而产生的瞬态传导;(3)气泡/表面接触区域外部的微对流。发现瞬态传导机制的影响区域限于气泡/表面接触区域,其中大部分传热发生在气泡从表面分离之前。微对流传热机制主要位于接触区域之外,并且在本质上是稳定的。发现所有三种热传递机理都对总表面热传递做出了重要贡献。本研究的第二部分提供了结果的理论分析。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号