首页> 外文期刊>International Journal of Heat and Mass Transfer >Exact solution for the conjugate fluid-fluid problem in the thermal entrance region of laminar counterflow heat exchangers
【24h】

Exact solution for the conjugate fluid-fluid problem in the thermal entrance region of laminar counterflow heat exchangers

机译:层流逆流换热器热入口区共轭流体问题的精确解

获取原文
获取原文并翻译 | 示例
           

摘要

A generalized Leveque solution is presented for the conjugate fluid-fluid problem that arises in the thermal entrance region of laminar counterflow heat exchangers. The analysis, carried out for constant property fluids, assumes that the Prandtl and Peclet numbers are both large compared to unity, and neglects axial conduction both in the fluids and in the plate, assumed to be thermally thin. Under these conditions, the thermal entrance region admits an asymptotic self-similar description where the temperature varies as a power j of the axial distance, with the particularity that the self-similarity exponent must be determined as an eigenvalue by solving a transcendental equation arising from the requirement of continuity of heat fluxes at the heat conducting wall. Specifically, the analysis reveals that j depends only on the lumped parameter k = (A_2/A_1 )~(1/3)(α_1 /α_2)~(1/3)(k_2/K_1), defined in terms of the ratios of the wall velocity gradients. At, thermal diffusivities, α_1, and thermal conductivities, k_1, of the fluids entering, 1, and exiting, 2, the heat exchanger. Moreover, it is shown that for large (small) values of k the solution reduces to the classical first (second) Leveque solution. Closed-form analytical expressions for the asymptotic temperature distributions and local heat-transfer rate in the thermal entrance region are given and compared with numerical results in the counterflow parallel-plate configuration, showing very good agreement in all cases.
机译:针对层状逆流换热器的热入口区域中出现的共轭流体问题,提出了一种广义的Leveque解。针对恒定性质的流体进行的分析假定,普朗特数和佩克列数均大于1,而单位数则大,并且忽略了流体和板中的轴向传导(假定为热稀薄)。在这些条件下,热入射区域接受渐近的自相似描述,其中温度随轴向距离的幂j变化,其特殊之处在于,必须通过求解由以下公式产生的超越方程,将自相似指数确定为特征值导热壁上热通量的连续性要求。具体而言,分析表明,j仅取决于集总参数k =(A_2 / A_1)〜(1/3)(α_1/α_2)〜(1/3)(k_2 / K_1),其比率为壁速度梯度。在此,进入热交换器1和离开热交换器2的流体的热扩散率α_1和热导率k_1。此外,它表明,对于k的大(小)值,该解简化为经典的第一(第二)Leveque解。给出了热入口区域中渐近温度分布和局部传热速率的闭式分析表达式,并将其与逆流平行板结构中的数值结果进行了比较,表明在所有情况下都具有很好的一致性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号