首页> 外文期刊>International Journal of Heat and Mass Transfer >Experimental investigation of liquid nitrogen cavitating flows in converging-diverging nozzle with special emphasis on thermal transition
【24h】

Experimental investigation of liquid nitrogen cavitating flows in converging-diverging nozzle with special emphasis on thermal transition

机译:集中式-扩口式喷嘴中液氮空化流的实验研究

获取原文
获取原文并翻译 | 示例
           

摘要

The objective of this paper is to investigate the dynamic evolution of unsteady liquid nitrogen cavitating flows in a wide range of free-stream conditions and propose a thermal parameter to evaluate and predict the transition process of two typical cavitation dynamics in liquid nitrogen. The dynamic evolutions of liquid nitrogen cavitating flows in a converging-diverging (C-D) nozzle with a throat height of 2.0 mm under a wide range of free-stream conditions were experimentally investigated. Experiments were carried out in liquid nitrogen with the temperature range from 68 K to 86 K, the pressure in the tanks is within the range of 30-300 kPa. The results show that two typical cavitation dynamics, namely the quasi-isothermal mode and the thermo-sensitive mode were observed under similar cavitation number and Reynolds number with the increasing throat temperature. The cavitation dynamics transits from the quasi-isothermal mode to the thermo-sensitive mode with the increasing throat temperature, and the transition temperature (transition mode) is approximately at 77-78 K. In the quasi-isothermal mode, the shedding cavity with clear interface collapses immediately after shedding. The cavity area increases with the increasing temperature under similar cavitation number and Reynolds number. In the transition mode, the magnitude of cavity area, the time duration of the shedding process, as well as the cavitation aggressiveness reaches the maximum values. In the thermo-sensitive mode, the shedding cavity turns to be mushy and frothy, and the mushy interface collapses slowly after shedding. The cavity area decreases with the increasing temperature under similar cavitation number and Reynolds number. When the thermodynamic effects completely dominate the change of the cavitation dynamics in the thermo-sensitive mode, the cavitation process becomes more stable. The shedding cavity collapses more slowly, while moves more quickly. The thermal parameter C-factor could quantitatively evaluate and predict dynamics transition from the quasi-isothermal mode to the thermo-sensitive mode in liquid nitrogen cavitating flows. The transition mode (transition temperature) should be prevented from causing the maximum cavitation aggressiveness in liquid nitrogen apparatus or system. (C) 2018 Elsevier Ltd. All rights reserved.
机译:本文的目的是研究大范围自由流条件下非稳态液氮空化流的动态演化,并提出一个热参数来评估和预测液氮中两种典型的空化动力学的转变过程。实验研究了在宽范围的自由流条件下,在喉高为2.0 mm的会聚-发散(C-D)喷嘴中液氮空化流的动态演变。实验是在液氮中进行的,温度范围为68 K至86 K,槽中的压力在30-300 kPa的范围内。结果表明,随着喉温的升高,在相似的空化数和雷诺数下,观察到两种典型的空化动力学,即准等温模式和热敏模式。随着喉咙温度的升高,空化动力学从准等温模式转变为热敏模式,并且转变温度(转变模式)大约为77-78K。在准等温模式下,脱落腔清晰可见。脱落后界面立即崩溃。在相似的空化数和雷诺数下,腔体面积随温度的升高而增加。在过渡模式下,型腔面积的大小,脱落过程的持续时间以及空化侵蚀性达到最大值。在热敏模式下,脱落的腔体变得糊状且泡沫状,并且脱落后糊状的界面缓慢塌陷。在相似的空化数和雷诺数下,腔体面积随温度的升高而减小。当热力学效应完全支配了热敏模式下的空化动力学变化时,空化过程变得更加稳定。脱落的腔室塌陷更缓慢,而移动更快。在液氮空化流中,热参数C因子可以定量地评估和预测从准等温模式到热敏模式的动力学转变。应防止过渡模式(过渡温度)在液氮设备或系统中引起最大的汽蚀侵蚀性。 (C)2018 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号