Characterization of active fault scarps from LiDAR data: a case study from Central Apennines (Italy)

摘要

A high-resolution digital elevation model (DEM, 1 ms spacing) derived from an airborne light detection and ranging (LiDAR) campaign was used in an attempt to characterize the structural and erosive elements of the geometry of the Pettino fault, a seismogenic normal fault in Central Apennines (Italy). Four 90- to 280 m-long fault scarp segments were selected and the surface between the base and the top of the scarps was analyzed through the statistical analysis of the following DEM-derived parameters: altitude, height of the fault scarp, and distance along strike, slope, and aspect. The results identify slopes of up to 40° in faults lower reaches interpreted as fresh faces, 34° up the faces. The Pettino fault maximum long-term slip rate (0.6-1.1 mm/yr) was estimated from the scarp heights, which are up to 12-19 m in the selected four segments, and the age (ca. 18 ka) of the last glacial erosional phase in the area. The combined analysis of the DEM-derived parameters allows us to (a) define aspects of three-dimensional scarp geometry, (b) decipher its geomorphological significance, and (c) estimate the long-term slip rate.