首页> 外文期刊>International Journal of Electrical Power & Energy Systems >Design of decentralized variable structure stabilizers for multimachine power systems
【24h】

Design of decentralized variable structure stabilizers for multimachine power systems

机译:多机动力系统分散变结构稳定器设计

获取原文
获取原文并翻译 | 示例
           

摘要

Variable structure (VS) stabilizers possess the advantages of better transient response, insensitivity to plant parameter variations, etc. In general, variable structure controls involve measurements from all the states, which is not possible in a multimachine power system (MMPS). In this paper, the switching planes for the variable structure stabilizers are selected in such a way that computation of switching planes involves local state variables only. The coefficients of the switching plane equation are determined using the Riccati equation approach. Through the approximation of neglecting non-diagonal blocks of the state space matrix, at the design stage, a decentralized Variable Structure stabilizer (VS stabilizer) is obtained. To accept the switching plane so obtained, a check of the closed loop eigenvalues is made with the actual state space matrix. After computation of the switching plane, the variable gains are also selected in such a way that control signal computation involves only local state variables. This is possible as the gains of nonlocal state variables are small compared with local variables. The response of the system with variable structure stabilizers indicates that the system performance is improved.
机译:可变结构(VS)稳定器具有更好的瞬态响应,对工厂参数变化不敏感等优点。通常,可变结构控制涉及对所有状态的测量,这在多机动力系统(MMPS)中是不可能的。在本文中,以如下方式选择用于可变结构稳定器的切换平面,使得切换平面的计算仅涉及局部状态变量。切换平面方程的系数是使用Riccati方程方法确定的。通过近似忽略状态空间矩阵的非对角线块,在设计阶段,获得了分散的可变结构稳定器(VS稳定器)。为了接受如此获得的切换平面,使用实际状态空间矩阵对闭环特征值进行检查。在计算交换平面之后,还以控制信号计算仅涉及局部状态变量的方式选择可变增益。这是有可能的,因为与局部变量相比,非局部状态变量的增益很小。具有可变结构稳定剂的系统的响应表明系统性能得到了改善。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号