首页> 外文期刊>International journal of design & nature and ecodynamics >THE INFLUENCE OF PLANTING DENSITY ON MODULUS OF ELASTICITY OF STRUCTURAL TIMBER FROM IRISH-GROWN SITKA SPRUCE
【24h】

THE INFLUENCE OF PLANTING DENSITY ON MODULUS OF ELASTICITY OF STRUCTURAL TIMBER FROM IRISH-GROWN SITKA SPRUCE

机译:种植密度对爱尔兰锡特卡云杉结构木材弹性模量的影响

获取原文
获取原文并翻译 | 示例
           

摘要

As Europe moves towards more sustainable construction, there is an increasing demand for structural timber. The purpose of this research is to explore new forestry management strategies, which will produce an optimum balance of the quantity and quality of structural timber over a minimum period of time. The focus is on timber from Sitka spruce, which is the most important Irish commercial forest tree species. Planting density is an important factor affecting both structural timber quantity and quality. Trees with wider spacing get more light and grow faster, which affects annual ring width and knot size. These, in turn, affect the bending strength, modulus of elasticity and density of timber, which are the grade determining properties according to EN 338:2003. The current standard planting density in Ireland is 2500 stems/ha and the timber produced meets the requirements for the C16 strength class. For Irish-grown Sitka spruce timber, modulus of elasticity is the critical grade determining property, which dictates the strength class. This study has two aims, first to explore the possibilities of improving the strength class by increasing the planting density and second, to explore the possibility of keeping the same class while increasing the quantity of structural timber by reducing the planting density. The effects of different planting densities, ranging from 1550 to 3700 stems per hectare, on the structural properties of Sitka spruce timber originated from a forest in County Leitrim are examined. Overall, 72 trees were felled and cut into logs. Logs were non-destructively tested using acoustic tools and subsequently processed into structural timber. The timber boards were then tested using three different types of strength graders in order to examine the difference in timber modulus of elasticity between different planting densities. The results showed statistically significant effects of different planting densities on the variation in timber modulus of elasticity.
机译:随着欧洲向更具可持续性的建筑发展,对结构木材的需求也在不断增长。这项研究的目的是探索新的林业管理策略,这些策略将在最短的时间内使结构木材的数量和质量达到最佳平衡。重点是来自锡特卡云杉的木材,这是爱尔兰最重要的商业林木树种。种植密度是影响结构木材数量和质量的重要因素。间距较大的树木会获得更多的光线并生长得更快,这会影响年轮宽度和结节大小。这些反过来又影响木材的抗弯强度,弹性模量和密度,这是根据EN 338:2003确定等级的性能。爱尔兰目前的标准种植密度为2500茎/公顷,生产的木材符合C16强度等级的要求。对于爱尔兰种植的Sitka云杉木材,弹性模量是决定等级的关键属性,它决定了强度等级。这项研究有两个目的,首先是探索通过增加种植密度来提高强度等级的可能性,其次是探索在降低种植密度来增加结构木材数量的同时保持相同等级的可能性。研究了每公顷1550至3700茎的不同种植密度对源自Leitrim县森林的Sitka云杉木材的结构特性的影响。总体而言,砍伐了72棵树木并砍成原木。使用声学工具对原木进行非破坏性测试,然后将其加工成结构木材。然后使用三种不同类型的强度分级机对木板进行测试,以检查不同种植密度之间木材弹性模量的差异。结果表明,不同种植密度对木材弹性模量变化具有统计学意义。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号