Architecture Design, Performance Analysis And Vlsiimplementation Of A Reconfigurable Shared Buffer for High-speed Switch/router

摘要

Modern switches and routers require massive storage space to buffer packets. This becomes more significant as link speed increases and switch size grows. From the memory technology perspective, while DRAM is a good choice to meet capacity requirement, the access time causes problems for high-speed applications. On the other hand, though SRAM is faster, it is more costly and does not have high storage density. The SRAM/DRAM hybrid architecture provides a good solution to meet both capacity and speed requirements. From the switch design and network traffic perspective, to minimize packet loss, the buffering space allocated for each switch port is normally based on the worst-case scenario, which is usually huge. However, under normal traffic load conditions, the buffer utilization for such configuration is very low. Therefore, we propose a reconfigurable buffer-sharing scheme that can dynamically adjust the buffering space for each port according to the traffic patterns and buffer saturation status. The target is to achieve high performance and improve buffer utilization, while not posing much constraint on the buffer speed. In this paper, we study the performance of the proposed buffer-sharing scheme by both a numerical model and extensive simulations under uniform and non-uniform traffic conditions. We also present the architecture design and VLSI implementation of the proposed reconfigurable shared buffer using the 0.18 |im CMOS technology. Our results manifest that the proposed architecture can always achieve high performance and provide much flexibility for the high-speed packet switches to adapt to various traffic patterns. Furthermore, it can be easily integrated into the functionality of port controllers of modern switches and routers.