首页> 外文期刊>Integrated Ferroelectrics: An International Journal >Electrical and Thermal Studies on the Polyvinylchloride/Carbon Black Composites Induced by High Energy Ion Beam
【24h】

Electrical and Thermal Studies on the Polyvinylchloride/Carbon Black Composites Induced by High Energy Ion Beam

机译:高能离子束诱导聚氯乙烯/炭黑复合材料的电学和热学研究

获取原文
获取原文并翻译 | 示例
           

摘要

Modification induced by energetic ion in polyvinylchloride (PVC)/carbon black (CB) composites was studied using impedance gain-phase analyzer, differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and atomic force microscopy (AFM). Different concentrations of CB were dispersed in PVC films. These films were irradiated with 140 MeV Ag11+ ions at the fluences of 1 × 1011 and 1 × 1012ions/cm2. The ac electrical conductivity and dielectric response were studied as a function of filler, frequency and ion fluence. It was found that ac electrical conductivity increases with increasing the percentage of CB, frequency and ion fluence. The observed enhancement in ac electrical conductivity is attributed to the increase in the number of conduction paths created by the carbon black contents in the composites to give a higher electrical conductivity. An increase in dielectric constant was observed with the ion fluence and also with the carbon black content, which is attributed to the interfacial polarization of heterogeneous systems. Differential scanning calorimetry (DSC) analysis showed that the glass transition temperature (Tg) shifted towards lower temperature with increasing the ion fluence. It may be attributed to the scissioning of polymer chains and as a result increase of free radicals, unsaturation etc., which lead to the transformation of polymer into amorphous phase. Atomic force microscopy (AFM) studies revealed that the surface average roughness of the composites increases as filler concentration increases and decreases upon irradiation. SEM micrographs showed that carbon black particles organized into aggregates of micro spherical voids and decreased its size upon irradiation.View full textDownload full textKeywordsPVC/CB composites, ion beam modification, electrical properties, differential scanning calorimetry, atomic force microscopyRelated var addthis_config = { ui_cobrand: "Taylor & Francis Online", services_compact: "citeulike,netvibes,twitter,technorati,delicious,linkedin,facebook,stumbleupon,digg,google,more", pubid: "ra-4dff56cd6bb1830b" }; Add to shortlist Link Permalink http://dx.doi.org/10.1080/10584587.2010.489429
机译:利用阻抗增益相分析仪,差示扫描量热法(DSC),扫描电子显微镜(SEM)和原子力显微镜(AFM)研究了高能离子在聚氯乙烯(PVC)/炭黑(CB)复合材料中引起的改性。不同浓度的CB分散在PVC薄膜中。用140 MeV Ag 11 + 离子以1×10 11 和1×10 12 ions / cm的通量辐照这些薄膜。 2 。研究了交流电导率和介电响应随填料,频率和离子通量的变化。发现交流电导率随CB百分比,频率和离子通量的增加而增加。观察到的交流电导率增强归因于复合材料中炭黑含量所产生的导电路径数量增加,以提供更高的电导率。观察到介电常数随离子通量以及炭黑含量的增加而增加,这归因于异质体系的界面极化。差示扫描量热法(DSC)分析表明,随着离子通量的增加,玻璃化转变温度(Tg)向较低的温度移动。这可能归因于聚合物链的断裂以及自由基增加,不饱和等的结果,这导致聚合物转化为非晶相。原子力显微镜(AFM)研究表明,复合材料的表面平均粗糙度随填料浓度的增加和辐照程度的降低而增加。 SEM显微照片显示炭黑颗粒组织成微球形空隙的聚集体,并在辐照下减小了其尺寸。查看全文下载全文关键词PVC / CB复合材料,离子束改性,电性能,差示扫描量热法,原子力显微镜法相关的var addthis_config = { “泰勒和弗朗西斯在线”,services_compact:“ citeulike,netvibes,twitter,technorati,delicious,linkedin,facebook,stumbleupon,digg,google,更多”,发布:“ ra-4dff56cd6bb1830b”};添加到候选列表链接永久链接http://dx.doi.org/10.1080/10584587.2010.489429

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号