Extending the Frame-Angle-Based Direct Torque Control of PMSM Drives to Low-Speed Operation

摘要

This paper extends the application of a frame-angle-based (FAB) direct torque controller (DTC) for permanent magnet synchronous motor (PMSM) drives to low and very low speeds. The FAB-DTC is intended for PMSM drives that are fed by 3 phi six-pulse wavelet-modulated dc-ac converters. The foundations of the FAB-DTC are based on regulating the d-q-axis stator voltages, in response to variations in the load torque and/or drive speed. The adjustments in d-q-axis stator voltages are created by changing the angle. of the frame spanned by the d-q-axis stator voltages. In order to extend the FAB-DTC to low and very low speeds, the changes in. are accompanied by changes in the maximum scale. The values of maximum scale and d-q-axis stator voltages are used to update or change the reference signals employed by the wavelet modulation to generate switching pulses to operate a 3f dc-ac converter. The complete PMSM drive system incorporating the modified FAB-DTC is implemented for a 10-hp PMSM drive system. The performance of the FAB-DTC is investigated for different changes in the command torque for various low and very low speeds. Performance results demonstrate stable, fast, dynamic, and accurate responses, which have minor sensitivity to variations in load torque and/or drive speed.