首页> 外文期刊>Industrial Electronics, IEEE Transactions on >Piezoelectric Multimode Vibration Control for Stiffened Plate Using ADRC-Based Acceleration Compensation
【24h】

Piezoelectric Multimode Vibration Control for Stiffened Plate Using ADRC-Based Acceleration Compensation

机译:基于ADRC的加速度补偿的加筋板压电多模振动控制

获取原文
获取原文并翻译 | 示例
           

摘要

Considering the variety of uncertainties and disturbances in real active vibration control systems, a novel piezoelectric multimode control strategy for an all-clamped stiffened plate (ACSP) structure is proposed in this paper. First, an active disturbance rejection control (ADRC) method, i.e., the extended state observer (ESO)-based vibration control scheme, is employed to ensure the performance of the vibration suppression and rejection of the lumped disturbances of the closed-loop system. Second, a proportional differential controller and an acceleration feedforward controller produce the control law for each vibration mode. Moreover, a chaos optimization method based on a logistic map is introduced to automatically tune the parameters of the feedback channel. The stability and superiority of the proposed controller are theoretically analyzed. Compared with the classical ADRC method, the multimode vibration experimental results demonstrate that the control performance of the first mode is improved from 12.04 to 14.06 dB; meanwhile, the performance of the second mode is also improved, having changed from 11.1 to 13.68 dB.
机译:考虑到实际主动振动控制系统中不确定性和扰动的多样性,提出了一种全夹紧加劲板(ACSP)结构的新型压电多模控制策略。首先,采用主动干扰抑制控制(ADRC)方法,即基于扩展状态观察器(ESO)的振动控制方案,以确保抑制振动和抑制闭环系统集中干扰的性能。其次,比例微分控制器和加速度前馈控制器产生每种振动模式的控制律。此外,引入了一种基于逻辑映射的混沌优化方法来自动调整反馈通道的参数。从理论上分析了所提出控制器的稳定性和优越性。与经典的ADRC方法相比,多模振动实验结果表明,第一模的控制性能从12.04 dB提高到14.06 dB;同时,第二种模式的性能也有所提高,从11.1 dB变为13.68 dB。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号