...
首页> 外文期刊>Vehicular Technology, IEEE Transactions on >Low-Cost Three-Dimensional Navigation Solution for RISS/GPS Integration Using Mixture Particle Filter
【24h】

Low-Cost Three-Dimensional Navigation Solution for RISS/GPS Integration Using Mixture Particle Filter

机译:使用混合粒子滤波器的RISS / GPS集成的低成本三维导航解决方案

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Recent technological advances in both GPS and low-cost microelectromechanical-system (MEMS)-based inertial sensors have enabled the monitoring of the location of moving platforms for numerous positioning and navigation (POS/NAV) applications. GPS is presently widely used in land vehicles. However, in some environments, the GPS signal may suffer from signal blockage and multipath effects that deteriorate the positioning accuracy. When miniaturized inside any moving platforms, the MEMS-based inertial navigation system (INS) can be integrated with GPS and enhance the performance in denied GPS environments (like in urban canyons). Targeting a low-cost navigation solution for land vehicles, this paper uses a reduced inertial sensor system (RISS) with MEMS-based inertial sensors. In this paper, the RISS consists of one single-axis gyroscope and a two-axis accelerometer used together with the vehicle's odometer, and the whole system is integrated with GPS to obtain a 3-D navigation solution. The traditional technique for this integration problem is Kalman filtering (KF). Due to the inherent errors of MEMS inertial sensors and the relatively high noise levels associated with their measurements, KF has limited capabilities in providing accurate positioning. Particle filtering (PF) was recently suggested as a nonlinear filtering technique to accommodate arbitrary inertial sensor characteristics, motion dynamics, and noise distributions. An enhanced version of PF is utilized in this paper and is called Mixture PF. The performance of the proposed 3-D navigation solution using Mixture PF for RISS/GPS integration is examined by road-test trajectories in a land vehicle. The proposed method is compared with four other solutions: 1) 3-D solution using KF for full INS/GPS integration; 2) 2-D solution using KF for RISS/GPS integration; 3) 2-D solution using Mixture PF for RISS/GPS integration; and 4) 3-D solution using sampling/importance resampling (SIR) PF for RISS/GPS integ-nration. The experimental results show that the proposed solution outperforms all the compared counterparts.
机译:GPS和基于低成本微机电系统(MEMS)的惯性传感器的最新技术进步已实现了对众多定位和导航(POS / NAV)应用中移动平台位置的监控。 GPS目前广泛用于陆地车辆。但是,在某些环境中,GPS信号可能会受到信号阻塞和多径效应的影响,从而降低定位精度。当在任何移动平台内小型化时,基于MEMS的惯性导航系统(INS)可以与GPS集成在一起,并在被拒绝的GPS环境中(例如在城市峡谷中)增强性能。针对陆地车辆的低成本导航解决方案,本文使用了带有基于MEMS的惯性传感器的精简惯性传感器系统(RISS)。在本文中,RISS由一个单轴陀螺仪和一个两轴加速度计与车辆的里程表一起使用组成,整个系统与GPS集成以获得3-D导航解决方案。解决此集成问题的传统技术是卡尔曼滤波(KF)。由于MEMS惯性传感器的固有误差以及与它们的测量相关的相对较高的噪声水平,KF在提供精确定位方面的能力有限。最近,提出了将粒子滤波(PF)作为一种非线性滤波技术,以适应任意惯性传感器特性,运动动力学和噪声分布。本文使用了PF的增强版本,称为混合PF。通过陆地车辆的道路测试轨迹检查了使用混合PF进行RISS / GPS集成的拟议3-D导航解决方案的性能。将该方法与其他四个解决方案进行了比较:1)使用KF进行完全INS / GPS集成的3-D解决方案; 2)使用KF进行RISS / GPS集成的二维解决方案; 3)使用Mixture PF进行RISS / GPS集成的二维解决方案;和4)使用RISS / GPS集成的采样/重要性重采样(SIR)PF的3D解决方案。实验结果表明,所提出的解决方案优于所有比较的同类解决方案。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号