...
首页> 外文期刊>IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control >A square-plate piezoelectric linear motor operating in two orthogonal and isomorphic face-diagonal-bending modes
【24h】

A square-plate piezoelectric linear motor operating in two orthogonal and isomorphic face-diagonal-bending modes

机译:在两种正交同构面-对角弯曲模式下运行的方板压电线性电动机

获取原文
获取原文并翻译 | 示例
           

摘要

We report a piezoelectric linear motor made of a single Pb(Zr,Ti)O3 square-plate, which operates in two orthogonal and isomorphic face-diagonal-bending modes to produce precision linear motion. A 15 ?? 15 ?? 2 mm prototype was fabricated, and the motor generated a driving force of up to 1.8 N and a speed of 170 mm/s under an applied voltage of 100 Vpp at the resonance frequency of 136.5 kHz. The motor shows such advantages as large driving force under relatively low driving voltage, simple structure, and stable motion because of its isomorphic face-diagonal-bending mode.
机译:我们报告了一种由单个Pb(Zr,Ti)O 3 方形板制成的压电线性电动机,该电动机以两种正交且同构的面对角弯曲模式运行,以产生精确的线性运动。一个15 ?? 15 ??制作了2mm的原型,在136.5kHz的共振频率下,在100Vpp的施加电压下,电动机产生了高达1.8N的驱动力和170mm / s的速度。电动机由于具有同构的面对角弯曲模式,因此在较低的驱动电压下具有较大的驱动力,结构简单,运动稳定等优点。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号